High Voltage SMD2835 180LEDS/M LED Strip Light 1 YEARS WARRANTY

Short Description:

Wire:Aluminum,LEDs:Alloy wire+Iron lining,1 Year Warranty
■ The outer casing is molded once,IP65 protection and it can be used indoor and outdoor
■ No external power adapter, direct AC110V/220V mains use
■ LED light source, low energy consumption, high lifespan
■ Flexible body, surface and corner are not limited
■ Low voltage drop, easy installation, 50 meters can ensure the same brightness
■ Contains no elements such as lead and mercury,environmentally friendly


  • CURRENT PRICE: Get Latest Offer
  • OEM/OEM: Available
  • TRADE TERMS: EXW, FOB Shenzhen, CIF, CFR
  • PAYMENT TERMS: T/T 30% deposit, the balance before shipment or L/C
  • Product Detail

    APPLICATION

    TEST REPORT

    Product Tags

    01

    02

    Item No.

    Voltage

    LEDs/M

    PCB  Width

     Wire  material

    LM/LEDs

    CCT

    Product  Size(mm)

    Package

    PSE-2835-60D

    AC110V/220V

    60LEDs

    5mm

    Wire:AL

    LEDs:Alloy wire+Iron lining

    20~22

    Warm White/

    Pure White

    11.5*7

    100M/ROLL  1ROLL/CTN

    PSE-2835-120D

    120LEDs

    6mm

    11.5*7

    100M/ROLL  1ROLL/CTN

    PSE-2835-180D

    180LEDs

    12mm

    17*7.5

    PSE-5050-60D

    60LEDs

    8mm

    12~14LM

    W/R/G/B

    13*7

    50M/ROLL,

    1ROLL/CTN

    10mm

    RGB

    15*7

    PSE-5050-144D

    144LEDs

    12mm

    W/R/G/B

    18*7

    PSE-5050-30D

    30LEDs

    8mm

    W/R/G/B

    13*7

    RGB

    15*7

    PSE-3528-60D

    60LEDs

    5mm

    4~5LM

    W/R/G/B

    11.5*7

    100M/ROLL

    1ROLL/CTN

    8mm

    RGB

    13*7

    50M/ROLL

    1ROLL/CTN

    PSE-3528-120D

    120LEDs

    6mm

    W/R/G/B

    11.5*7

    100M/ROLL

    1ROLL/CTN

    PSE-5730-60D

    60LEDs

    8mm

    45~50LM

    Warm White/

    Pure White

    13*7

    50M/ROLL

    1ROLL/CTN

    PSE-3014-120D

    120LEDs

    6mm

    10~12LM

    Warm White/  Pure White

    11.5*7

    100M/ROLL  1ROLL/CTN

    0304Attention Please:

    1. Each light strip is connected to a rectifier bridge stack and plug, which can be easily used by simply plugging the plug into a power outlet. Please confirm the product power before use, ensure that the power supply line is not overloaded, and the circuit has a circuit protector, such as a power outlet with a fuse or a leakage switch. Please refer to the product technology and photoelectric parameters for use to ensure that it works within ±5% of the voltage parameters.

    2. If you want a custom length, you should cut it at the 0.5/1 meter unit weld position, not less than the minimum unit length or cut within the unit group. After cutting, it should be noted that the incision should be sealed with waterproof insulating glue to avoid burning the product or causing a safety accident (the damage caused by the product supplier is not responsible). We do not recommend that you cut the length yourself. If you need non-standard length products, please contact our marketing staff.

    3. Do not twist the lamp strip continuously. If it is twisted many times, it will cause fatigue damage to the internal power line. The twist angle is not less than 45 degrees. Do not bend in the arc below 60mm in diameter. Soft lights should be used for outdoor and indoor use to prevent fire, electric shock and personal injury.

    4. For the stable work of this product, please use the product in some places with good ventilation. It is forbidden to roll the entire light strip together.

    5. In order to ensure the life of the lamp strip, it is recommended that the power cord should not be pulled hard during use, and it is forbidden to collide and force the surface of the lamp bead. The light bar must be installed and fixed firmly, and there must be no fluttering or swinging. Otherwise, the light bar wire is fatigued and broken, and the lamp strip is damaged;

    6. The tail end of the light bar must be covered with a tail plug; when used outdoors, each interface must be firm and free of short-circuit hidden dangers. When installing outdoors, the interface must be sealed with glass glue or other appropriate methods to ensure that the interfaces do not enter. water;

    7. Install and fix, do not use metal materials such as iron wire to tightly tie the lamp to prevent the wire from falling into the light bar, causing short circuit leakage and burning of the light bar;

    8. If the light strip is damaged, please cut off the unit immediately and do not continue to use it to avoid danger.

    9. This product is not a children’s toy, but it is easy to cause children’s interest. Please install it in a place that children can’t reach or under adult supervision. It is strictly forbidden to use this product directly in places where people such as swimming pools and rivers are in close contact to prevent safety accidents.


  • Previous:
  • Next:

  • 04